OEM Dishwasher Pump W11612326,W10805386

About this item

OEM Dishwasher Circulation Pump W11612326. Also replaces W10805386, W10879262. The pump comes with OETIKER hose clamp. After installing the pump you will need a clamp pincher to tighten it. See picture #3. Regular pliers won't work
Dare to Compare: this is the OEM pump. Exact same Fit, Form and Function. This is not the drain pump. Instead, it is the main circulation pump and motor assembly
Fits these models: 66513002N511 66513003 66513004 66513009 66513802 66513803 66513804 66513809 66514312 66514313 66514319 66514422 66514423 66514429 66514502 66514509 66515112 66515113 66515114 66515119 66517152 66517159 66517382 66517383 66517389 66517482 66517489N710 ADB1300AFB1 ADB1300AFS1 ADB1300AFW1 ADB1400AGB0 ADB1400AGB1 ADB1400AGB3 ADB1400AGS0 ADB1400AGS1 ADB1400AGS2 ADB1400AGS3 ADB1400AGW0 ADB1400AGW1 ADB1400AGW3 IDF320PAFW1 IDF330PAGW0 IUD7070DS3
AND: WDF110PABB5 WDF110PABS5 WDF110PABT5 WDF110PABW5 WDF120PAFB0 WDF120PAFS0 WDF120PAFT0 WDF120PAFW0 WDF121PAFB0 WDF121PAFW0 WDF130PAHB0 WDF130PAHB1 WDF130PAHB2 WDF130PAHS0 WDF130PAHS1 WDF130PAHS2 WDF130PAHT0 WDF130PAHW0 WDF130PAHW1 WDF130PAHW2 WDF320PADB3 WDF320PADD3 WDF320PADS3 WDF320PADT3 WDF320PADW3
AND: WDF330PAHB0 WDF330PAHB1 WDF330PAHB2 WDF330PAHB3 WDF330PAHB4 WDF330PAHD0 WDF330PAHD1 WDF330PAHD2 WDF330PAHS0 WDF330PAHS1 WDF330PAHS2 WDF330PAHS3 WDF330PAHS4 WDF330PAHT0 WDF330PAHT1 WDF330PAHT2 WDF330PAHT3 WDF330PAHT4 WDF330PAHW0 WDF330PAHW1 WDF330PAHW2 WDF330PAHW3 WDF330PAHW4 WDF331PAHB0 WDF331PAHS0 WDF331PAHW0 WDF520PADB6 WDF520PADB7 WDF520PADB8 WDF520PADB9 WDF520PADM6 WDF520PADM7 WDF520PADM8 WDF520PADM9 WDF520PADW6 WDF520PADW7 WDF520PADW8 WDF520PADW9 WDF540PADB3 WDF540PADM3 WDF540PADT3 WDF540PADW3 WDP340PAFB0 WDP340PAFW0 WDP370PAHB0 WDP370PAHB1 WDP370PAHW0 WDP370PAHW1

• Eduardo Villegas

  After 7 years of use I had to replace my circulation pump (or wash motor) for my Whirlpool dishwasher (model WDF330PAHS1). It is an OEM part and fit perfectly into this model. Even it is exactly the same brand that I had originally in my dishwasher (Brand: Askoll, Model: W10805386).The issue that I had was that my dishwasher filled with water but after that it stops and does not start with the cycle at all. Sometimes you could heard some noises coming below were this pump is located.After doing a lot of research over internet with these symptoms I found that 99% of this issue is caused by a failure of the circulation pump (or wash motor) and must be replaced.I recommend also to watch videos in YouTube on how to change the circulation pump (model W10805386).The procedure is not complicated and in my case it was done in less than 30 minutes!Please be aware that this circulation pump comes with OETIKER hose clamp. After installing the pump you will need a clamp pincher to tighten it and regular pliers won't work! So in this case I recommend to buy the "Tnisesm 9 inch Single Ear Clamp Pliers, Pinch Clamp Pliers, Ear Hose Clamps Tool, for Automotive Nail Puller Single Ear Hose Clamps Pliers" available here on AMAZON also. In YouTube you can watch videos that explain how to use this tool with the OETIKER hose clamp (NOT complex at all!!!)Also, a final recommendation is that when you change the circulation pump, also change the Dishwasher Pump Grommet to avoid leaks specially if you have many years of use (as in my case). For the Whirlpool dishwasher model WDF330PAHS1 the Dishwasher Pump Grommet is the part number WPW10538166.Now I am back in action with my dishwasher! Excellent replacement and recommended product!Buy it safe and with no worries at all!

• M.Brown

  YouTubed the dishwasher. Found out what the problem was. Ordered the part and it solved the problem. Works great.

• Daniel S

  This was less of a pain to install than I was expecting, but after install there were immediate leaks from the existing grommet that the pump fits into. I'm sure I mishandled it when pulling out the old pump, but since the dishwasher is 5+ years old it was probably pretty prone to getting damaged. Go ahead and buy the grommet at the same time. If you end up not needing it you can just return it.Also, this statement in the description isn't exactly correct: "After installing the pump you will need a clamp pincher to tighten it." The hose clamp that's loosely pre-installed on the fitting does require such a crimper, but in the box was a standard screwdriver/socket tightened spare hose clamp for in case you damage the one that requires crimping. So you can just remove the crimp required one and put on the spare if you don't have a crimper.Testing of the pump after install was limited since I have the grommet leak. I only was able to confirm it fixed my problem. But since it's an OEM part I don't expect any issues. I'll update if that's not the case once I get the grommet replaced.

• WB

  Fit perfectly on a Whirlpool wdf520padm 9 dishwasher. The dishwasher would turn on and water would go in it, but the arm wouldn’t spin and deliver water. It drained OK. I knew it had to be the circulation pump at that point. Helpful hint …get the gasket because you will tear up the old one trying to get it out. While you have the thing out, you may as well exchange the rubber pieces.Ladies, you can do this and save yourself $200. I did. if you have long fingernails… It’s not happening. If you’re worried about your manicure, you should be.There is a step-by-step by repairclinic.com on YouTube. It is excellent.

• William Manown

  The pump was relatively easy to install and the manufacturer even provided the additional, standard hose clamp instead of the factory option, which most people don't have the tool to install, so Thank You!

• Michael Doiron

  If your Kenmore dishwasher runs but doesn't circulate the water to upper level during wash mode, this is your culprit. Use a dab of vaseline on the rubber grommet the pump outlet inserts into and also the rubber block the mounting arm slides into for easier install. I opted for the threaded clamp as opposed to the crimp on clamp. Took probably 30 minutes to install. $80 do it myself vs $240 quote from repair shop.

• Amazon Customer

  The installation was relatively easy and if definitely fixed my problem. Let’s see how long it lasts.The old motor was connected to the rubber gasket with some adhesive. I couldn’t unplug that part without breaking the seal, so I opened the cover and just replaced the actually motor, maintaining the old cover.

• Tony Smoots

  My dishwasher stopeed working. After watching some YouTube videos I was able to determine that the circulating pump was the problem. I ordered this one, it came quickly the next morning. It includes a clamp that you can tighten with a screwdriver if you do not have the clamping tool. 10 minutes to change and it saved me $500.

• Brett

  They say you do need that special clamping pliers which I do have but I noticed this also came with a normal screw clamp to use in place of that. This is the second one I have installed they last about 2 years for us

• Eric Arsement

  Pump works very well.. just make sure all information is correct on pump as replacement and you'll be happy